Know about Test and Tag .

How do you know if the electrical equipments and appliances that you are using are safe? If you are running a business, you must comply with the safety rules and regulations of the Australian government. The process of knowing if the items are ‘electrically safe’ is known as test and tag. After the items are examined by professionals and given a clean chit, then they can be used in workplaces.

How do you know who is best qualified for test and tag? According to the rules of the Australian government, the person must be ‘competent’. This means that the person should be well-qualified for testing all the equipments so that they can be used in a workplace. He or she should have ample knowledge about the construction of the equipments and see if the equipments and the appliances are following the standard rules or not. In case of Be Smart Electrical, which is an electrical company based in Brisbane, all the employees are trained electricians. They will definitely note any defects, if there are any when they tag and test equipment.

When you tag and test equipment, you will need to inspect the appliance or equipment to see if they can be used. The electrical safety for any appliance is measured by checking the earth continuity, polarity, insulation or leakage, and tagging. Once they are inspected properly and tested they will be tagged as safe to use. The tags are applied on the electrical appliances. They will carry information like the date of the test, the next date where the test can take place, the results of the examination which will be recorded. The register of the test and tag result should be kept properly. If there are any details regarding repairs or inspection, they should be recorded too. If you hire the right electricians, he or she will be qualified to handle this task. After the tag and test results, the appliances are considered to be fit and ‘electrically safe’ for use.

If the equipment is termed as defective, it will be either repaired or a danger tag should be attached so that the item is removed. The equipment will then hold a compliance tag and the tag will carry information like the next re-test date along with a safety certificate which is issued with a certificate of compliance. If you want to know more about this tag and test system and look for professional service, you can simply browse through
http://www.electrical-test-and-tag.com.au/services/why-test-and-tag.html

Article Source: http://blogticles.com

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated